Linksys Router Setup
If you are searching for Linksys router setup steps, then you had landed on the right platform. In this article, we are going to discuss each and every aspect associated with the Linksys router setup. We hope by following various steps listed in this article, all your queries regarding the Linksys router setup will get resolved.
Even at the end of this article, we had dedicated a whole section on troubleshooting steps associated with router setup. That means if in case you get troubled while configuring Linksys router, then you can follow these steps to fix the issue.
By this let’s initiate our discussion of Linksys router setup.
The first question that may arise in your mind is, for which router these steps will be applicable?
Answer for this lies in a fact that setup process for various Linksys router( such as WRT3200ACM, WRT1900ACS, WRT1200AC, WRT120N, WRT160N, WRT54G, EA9300, EA8300, EA6900, EA4500, EA3500, EA2700, E4200, E3000, E2500, E3200, E1000, E2000, E2100L, E3000, E1200, E900,) remains same. So you can follow this setup process for any range of Linksys router.
Steps to launch Linksys Router Setup
We can divide steps involved in router setup process in following 6 sub-parts. That is:
- Ensuring workability of Modem.
- Establish a workable connection between Modem, router, and computer.
- Launch Linksys router setup page.
- Modify internet connection settings as per ISP cable/DSL.
- Connect your computer with internet
- After changing Wireless settings of Linksys router, connect all wireless devices and computers with router network.
Now Let’s proceed toward elaborating these steps in great depth.
Step 1:- Ensuring workability of Modem
Broadband modem plays a crucial role in accessing the internet. Thus firstly you have to connect your computer to the modem.
Nextly ensure that this computer is able to access internet services through this modem. If in case any issue persists then you are requested to connect to your Internet Service Provider(ISP) and make your modem in working state.
But if in case you are using DSL connection then you will not be able to access the internet by establishing the direct connection between computer and DSL modem. For this purpose, you will require PPPoE Username and password. If in case you are not aware of this PPPoE username and password then kindly connect your ISP for the same. Once you are done with it, ensure that your DSL modem is working properly, before proceeding for the next step.
In nutshell, we can conclude that the user needs to ensure proper workability of the modem before proceeding further in this setup process.
Step 2: Ensure the workable connection between Modem, Router, and computer.
Establish an Ethernet connection between your main computer, broadband modem, and router, as shown in the figure given below. For this, you have to connect modem with internet port of router and computer to LAN port of the router.
If you notice, you will find 4 LAN ports and 1 internet port on your router. You have to be cautious while establishing a connection between them.
If in case you connect these devices with wrong ports then they will not be able to communicate with each other and thus you will be unable to open up Linksys router setup page.
Step 3: Launch Linksys router Setup page
To launch the Linksys router setup page first thing required by the user is IP address, using which this page will be launched.
By default, IP address to launch setup page is 192.168.1.1. But in some cases, it may vary.
So it’s better to verify this IP address, before launching setup page.
To verify the same, do check DHCP IP address on your main computer.
For this open command prompt and then type
Now the question may arise that how to open command prompt??
For this press window button + R. Then enter “cmd” and press enter.
Once you enter
Then open internet browser on the computer and enter 192.168.1.1 in the address bar of the webpage.
Sometimes firewall may hinder your connection with setup page. Thus it is advisable to turn off the firewall while the installation process is going on.
Step 4: Alter the internet connection settings of the Linksys router as per your requirement.
Once the setup page is launched, you will be asked to enter login credential. By default credentials are:
BY entering the credentials you will get setup page on your screen. Here you can alter the router’s settings as per your requirements.
So you can make desirable changes by going to different tabs available on your screen.
Step 5: Changing internet connection settings
Then you will be required to change network connection settings as per your service provider.
If you are having Cable Internet Service Provider then you will be required to clone the MAC address of your main computer. You will find this option under “Basic Setup tab”. Then click on Save.
If you are having DSL Internet Service Provider then you will be needed to enter PPPoE user name and password given by your ISP.
For this change the Internet connection settings to PPPoE and enter the PPPoE user name and password. Once done, click on save the settings.
Step 6: Try to access internet on your main computer.
In case you find an issue while accessing the internet on the computer then this signifies that you might have missed the connection settings.
Step 7: Modify network settings.
After accessing the internet on your main computer, you can proceed for modifying network settings. For its select wireless tab, present on the setup page.
Over there you can change network name as well as a network password.
You are advised to change the credentials once you complete setup. Reason for the same is, to protect from an unauthorized connection.
Linksys router setup: Web-based Interface
Step 8: Connect to the Linksys router network with new credentials.