http://extender.linksys.com
LINKSYS EXTENDER
  •   

How to Set Up a Linksys Range Extender

Linksys Range Extender increases both the range and accessibility of your wireless network. The extender works by receiving signals from the wireless router and duplicating the signal, which results in doubling the range of the available signals.

Before you begin, make sure that you’ve done the following:

1. Use an Eethernet cable to connect the expander to the computer.
2. Input "192.168.1.240"in the address bar of your browser. This is the default address for "Linksys Wireless Range Expander. Press "Enter."
3. Login the setup page for the expander. Add the name of the expander and add in the same SSID number that you got from your router or access point into the SSID field. After that you find the drop down menu next to channel and choose the same channel used by your router or access point. Click on "Save."
4. Choose the same security settings on the security page for expander as you have on the wireless network, if the network is security protected. Click on "Save Settings."
 
If you still get any problem while setup your Linksys Wireless Range Extender then You sholud contact to Linksys offical website. Because we don't provide any technical support through any mode.
+

Community

 

DISCLAIMER : linksysextendersetupinfo.com is an independent service provider. Use of various trade marks and names ,which are protected under copyright are purely for referential purposes. We don't claim any affiliation with Linksys. If your product is under warranty then we recommend you to contact on Cisco-Linksys's official website . Because we don't provide any technical support through any mode.