Linksys EA2700 N600 Dual-Band WiFi Router setup

 

Linksys EA2700 N600 Dual-Band WiFi Router setup can be completed by just following 4 steps. These steps we are going to discuss in very this article.

We hope this article will prove to be highly beneficial to you.

But before initiating our discussion on Linksys EA2700 N600 Dual-Band WiFi Router setup, we will first have a glimpse of what is basic features of Linksys EA2700 N600 Dual-band WiFi router.

SO let’s get started with our discussion.

• Linksys EA2700 Dual-band N600 router is capable to function in the dual band that means both in 2.4 GHz and 5 GHz band.
• It comes along with 4 antennas, each pair of 2 antennas, is dedicated to one frequency band so that to enhance our experience with EA2700 router.
• Linksys EA2700 N600 router is built with 802.11n technology, which makes it capable to provide higher internet speed.
• This dual-band operability of Linksys EA2700 extender enables the router to minimize interferences and make user’s experience with Linksys router more enriched.
• Next stand able feature of Linksys EA2700 router is its advanced security characteristic.
• It comes along with 4 Ethernet ports that enable quick file sharing when is connected with other Gigabit-enabled devices such as PC, servers, etc.
• Linksys N600 router comes along with Linksys smart Wi-Fi software which provides user, an interface to modify settings related to her router.
• It is IPv6 enables. Thus can support the latest internet protocols.
• Another special feature is its Parental control. Using this feature, you can limit the access time of the user.
• Then comes Linksys EA2700 N600 router’s capability to be WPS enabled.

There exist lots of other features of the Linksys EA2700 router. But let’s limit our self to these main features and proceed toward Linksys EA2700 N600 Dual-Band WiFi Router setup.

For discussing the same, we will start from scratch. That means we will start from the package that you will receive when you bought a new Linksys EA2700 router.

Whenever you bought any new Linksys EA2700 N600 dual-band WiFi router then a new package will include.

1. Ethernet cable
2. AC power adapter
3. Setup CD.
4. Documents such as user manual

Once you opened up the package then the next step is to install it.

We all know that the router is used to create a home network.

Before initiating our process to create a home network, it is important to understand what is network and what constitutes a network.

In network, multiple devices exist which communicates between them.

The network can be as large as world network e.g. internet or can as small as of two or three devices.

As large is the network as much router or other networking devices you will require.

Three important components of any network will be:

Modem:- Its process is to modulate and demodulate the signal. It is used to connect your computer or router to Internet Service Provider(ISP).

Router:- Second important device is the Router. It is used to connect multiple devices in your network, with each other. These devices are connected either wirelessly or through wires, with the router. It works as a central point. In our case, it is Linksys EA2700 N600 Dual-Band WiFi Router.

Switch:-If you do not want too much functionality with your network and your network size is also small. Then switch may sound better choice to you the router. It also allows the user to connect multiple wired devices.

After having the basic introduction of the network, now let’s proceed toward steps to install a home network.

• Firstly, you will be required to purchase a central device that means either a router or switch, to set up your home network.
  For instance, if devices in your network are less, that can be connected using a switch, then do go for switch otherwise you will be required to purchase a router.
  (In our case we are considering it to be Linksys EA2700 N600 Dual-Band WiFi Router ) And you will also require a modem so that to receive an internet connection from ISP.
• The modem can be set up with the help of your ISP.
• Next step will be to set up the router. Steps of which we are going to list incoming section.
• Then connect the devices present in your network with this installed router. Steps involved in the same will also be listed in a separate article.

 

Linksys EA2700 N600 Dual-Band WiFi Router setup steps

 

The easiest way to launch Linksys EA2700 N600 Dual-Band WiFi Router setup, is to run setup CD, that you had got within the package.

Steps involved in the same are:

1. Insert the CD in CD drive. This will automatically open up the setup process.
2. Now click on Setup your Linksys router
3. Now follow the instructions that got shown on your screen.
4. Apart from this, you can link your Linksys router with your e-mail. For this email will be sent to your id. You will be required to open this email to link up your account with Linksys Smart Wi-Fi account

By just this, your Linksys EA2700 N600 Dual-Band WiFi Router setup gets completed.

But just installing Linksys EA2700 N600 router is not enough. You have to configure it, to make it work as per your requirements.